Manley Backbone Spécifications télécharger pdf (Page 9)

THE BACK PANEL

*Note: The panel shown is for the Sub-D connections option. For the other conguration, connec-

tors F, G and H are replaced with a pair of 56-pin ELCO connectors.

A B C D E F G H I J

A. Power Switch: Where the IEC power cable is inserted, the fuse is placed, and the power is switched

off and on. Complex, yes, but most users should be familiar with this feature set.

B. Output L/R (x2): Two sets of balanced outputs, typically going to your favorite A/D converter and a

monitor controller/VU meters.

C. Mix Input L/R: These inputs feed the FADER in MIX mode. See page ??? for more details.

D. SUM-DIF Outputs: The outputs for the raw encoded signals (unprocessed by Inserts 2 & 3). SUM

signal is attenuated 6dB, DIF is boosted 6 db to bring them to “normal” levels that are easier to

process.

E. PATCHABLE Sends/Returns: Factory-wired to patch into Insert 6, but internally user-adjustable. See

page ??? for details.

F. Inserts 5-8 connectors: DB-25 (or 56-pin ELCO) connections for the last 4 inserts.

G. SUM-DIF jack: DB-9 connector for Sum/Difference input and output.

H. Inserts 1-4 connectors:DB-25(or56-pinELCO)connectionsfortherst4inserts.

I. SEL Input L/R: The selected input’s dry signal comes out here.

J. Inputs: 3 sets of inputs for whatever you want to plug into the Backbone. We recommend audio

sources; you can try plugging in your toaster, but it probably won’t sound very good.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Pas de commentaire

Manley Backbone Spécifications Page 9